一種污水中砂粒高效采集裝置的設計與試驗
摘要：污水處理系統中的砂粒含量過高會造成設備磨損等很多負面影響，而如何對污水中砂粒含量進行快速并有效的檢測是當前的盲區。本研究設計了一種自制連續流采樣桶，其避免了單一取樣時步驟繁瑣等缺點，采用連續采樣方法來進行對樣品液的大量收集。對設計完成的采樣桶模型進行CFD數值模擬試驗，以此來探究其內部的流態和運行效率。試驗結果表明，在進水流速為0.1m/s、進水砂粒的平均粒徑為0.2mm的情況下，自制連續流采樣桶對砂粒的截留效率為94.1%。對設計的采樣桶制造后進行現場試驗，發現其對砂粒的平均截留效率為96.8%。從數值模擬和現場試驗的兩方面結果來看，該連續流采樣桶設計合理可靠，運行效率高，可用于實際生產。
關鍵詞：CFD ; 采樣裝置；砂粒采集；數值模擬；連續采樣
中圖分類號：TU991 文獻標識碼：A 文章編號：1000-4602（XXXX）XX
Design and testing of an efficient collection device for sand in sewage
Abstract：In wastewater treatment systems，high grit levels can lead to negative effects such as equipment wear and tear, and there is a current blind spot in how to quickly and effectively detect grit levels in wastewater. In this study, a home-made continuous flow sampling bucket was designed, which avoids the disadvantages of tedious steps in single sampling and uses a continuous flow sampling method for the bulk collection of sample liquids. CFD numerical simulations were carried out on the designed sampling bucket model to investigate its internal flow regime and operational efficiency. The test results show that at an inlet flow rate of 0.1m/s and an average particle size of 0.2mm, the home-made continuous flow sampling bucket has a retention efficiency of 94.1%. The designed sampling bucket was manufactured and tested in the field and found to have an average retention efficiency of 96.8% for sand particles. The results from both the numerical simulation and the field test show that the continuous flow sampling bucket has a reasonable and reliable design and operates with high efficiency for practical production.
Key words: CFD；sampling devices；grit collection; numerical simulation; continuous sampling
在污水處理系統中，砂粒會造成污水停留時間減小、泵等設備的磨損[1]、污泥活性降低、剩余污泥的厭氧消化困難[2]等危害。除砂系統是砂粒去除的必要單元[3]，評估污水廠除砂系統運行效率的關鍵方案就是對樣品中砂粒含量的有效檢測，而這前提是實現對樣品液的有效收集。
為了保證所得數據結果的準確性和代表性，需要實行對樣品液的大量收集，收集的體積通常在0.5m3以上�？梢园盐鬯畼悠芬旱氖占桨阜殖蓛纱箢惙椒�，即一次性取樣方法和連續采樣方法。一次性取樣方法通常借助水桶等容器直接從水體采集出，相對方便，但每次采集的體積較少，如果多次采集則費時費力，相關方法在林杰[4]、董志杰[5]等人的論文中有所體現。而連續采樣方法以連續流采樣桶為代表，該裝置的運行原理是讓污水同時流進和流出，在這個過程中利用裝置的結構特性實現對污水中砂粒的有效截留。這種方法的好處是受到樣品液總量的限制很小，只要截留下的砂粒不充滿裝置底部，理論上可以實現對污水長時間的連續采集。
本研究則是以旋流分離設備為設計基礎，利用旋流分離的原理，設計出了一種自制連續流采樣裝置。
